How To Remove Inside Front Vinil Panel To Repair In Vw Beetler 2002

Part Details

• Regulator Option:   without Motor
• Quantity:   2 Slice
• Operation:   Power
• Kit Includes:
    (ane) Front end Passenger Side Window Regulator
    (1) Front Driver Side Window Regulator

Product Features

Heavy Duty: Engineered to perform under harsh conditions

Improved Design: Upgraded components and materials to prevent premature failure

Installer-Friendly: Application Specific Pattern

Production Features

Consummate Associates: No modifications or assembly required

Carbon Brush and Commutator: More than twice the service life compared to copper

Flourine Rubber Seals: Resistant to loftier temperature, fuel, and solvents

Automatically adjusting pressure regulator for improved service life

SAE J2044 Compliant: Improved mounting security, minimized installation fault

Note:This window regulator is designed to work with mill manner motors only.  Due to variations in aftermarket designs, replacement motors may not take the correct gear style.

This window regulator is a high quality aftermarket part that meets or exceeds the operation of the original.  Subjected to extensive testing and quality control standards, allows us to offer this regulator with our superior warranty!

Item Condition: New

Attention California Customers:

Warning:This production tin betrayal yous to chemicals including Lead and Lead Compounds, which are known to the Land of California to cause cancer, and nascence defects or other reproductive harm.  For more than information, become to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part gratuitous of charge. This warranty covers the cost of the part merely.

FREE Shipping is standard on Orders shipped to the lower 48 States (Face-to-face U.s.). Standard shipping charges apply to Hawaii, Alaska and United states of america Territories.  Shipping is non available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories equally well equally P.O. Boxes and APO/FPO/DPO addresses.  Final shipping costs are bachelor at checkout.

How to Supersede Window Regulator 1998-2010 Volkswagen Beetle

Created on: 2011-12-31

Watch this video to learn how to fix a dull or stuck window. The experts at 1A Auto will show you how to supersede the window regulator in your 98-10 Volkswagen Beetle.

1. step ane : Remove the door panel

   • Use a putty pocketknife to carefully pry off the door pull.
   • Apply a Phillips screwdriver to remove the 3 screws now exposed.
   • Remove the three T20 screws on the bottom of the door panel.
   • Utilize a door panel clip tool or a putty pocketknife to pry off the door panel.
   • Lift the door panel up and off.
   • Disconnect the wiring from the back of the door panel.

2. step 2 : Remove the inner door panel.

   • Pull out the plugs in the inner door panel to reveal T30 screws.
   • Remove the T30 screws that secure the regulator motor.
   • Disconnect the window motor and carefully pull the window regulator motor off.
   • Position the window in place to access the two exposed T30 screws meliorate.
   • Unscrew the T30 screws.
   • Tape up the window.
   • Unplug your speaker.
   • Remove the wiring harness from the clips anchoring information technology to the inner door panel.
   • Remove the 10 mm bolts securing the inner door panel.
   • Pry the inner door panel off with a flat blade screwdriver.
   • Carefully remove the inner door console, working around the door lock.
   • Unplug the last wiring harness and unthread the cables from the inner door panel.

3. step 3 : Remove and supervene upon the window regulator.

   • Utilise a drill to remove the rivets to remove the window actuator.
   • Install the new window regulator using flat head bolts to replace the rivets.

4. stride 4 : Install the inner door panel.

   • Thread all the cabling and wiring back through the inner door panel.
   • Bolt the panel back in place with a 10 mm socket and ratchet.
   • Plug all the wiring back in.
   • Untape the window and guide it back into place on the regulator tracks.
   • Bolt the window regulator motor back in and screw in all the T30 screws.
   • Pin all the wiring harnesses back into their neat little anchoring clips on the inner panel.

5. pace 5 : Put the interior outer door panel dorsum on.

   • Check out our other videos for more detailed instructions on the re-installation of the interior outer door panel.

How To Remove Inside Front Vinil Panel To Repair In Vw Beetler 2002,

Source: https://www.1aauto.com/vw-beetle-front-driver-and-passenger-side-power-2-piece-window-regulator-set-trq-wra50315/i/1awrk00257

Posted by: johnsonnoteduckers.blogspot.com

Share this post